Raychem CeraPro Heating Cable

The flexible underfloor heating cable

Image of CeraPro installation overview

The ultra-thin and robust CeraPro heating cable is the ideal solution for installation in tile adhesive directly under floor tiles. The heating cable is only 3mm thick making it perfect for renovation projects where the floor height cannot be adjusted.

As an extremely robust fluoropolymer heater cable it offers long life, durability and exceptional resistance to mechanical damage and is supplied in an “easy-spool” box for quick and simple installation.

Benefits

  • Easy installation
    • Loose wire—ideal for small & irregular floor plans
    • Tape, mesh & glue stick fixing methods (included in box)
    • Pre-terminated with power cable
    • “Easy-spool” packaging for fast & simple installation
    • Only 3mm thick
  • Flexible power output: closer loops = higher output; wider loops = lower output (100-150W/m²)
  • For use under ceramic tiles & natural stone
  • Can be installed on cement screed & concrete subfloors
  • Can be used on top of Isolecta insulation boards

Pack contents

  • Prefabricated underfloor heating cable with power cable
  • Adhesive for fixing
Image of Cerapro in packaging
Product Name Length (m) Part Number Power (W)
CeraPro-160W141244-012136160
CeraPro-240W211244-008550240
CeraPro-320W281244-008551320
CeraPro-400W351244-008552400
CeraPro-475W431244-012137475
CeraPro-635W571244-008553635
CeraPro-800W711244-008554800
CeraPro-1140W1001244-0085551140
Heating cable11 W/m
Power outputDependent on cable spacing, 100-150 W/m² recommended
Voltage rating230 VAC
Outer jacket materialRobust, durable Fluoropolymer
Length of connecting cable2.5 m
Heating cable external diameter3.4 mm
Min. bending radius30 mm
ApprovalsCE marked, tested to IEC60800 heating cable standard, UkrSEPRO and EAC
Minimum heater spacing50 mm
RoomsBathrooms, kitchens, living areas, conservatories.
Particularly useful for irregularly shaped floor areas.
Floor coveringTile and natural stone. Installation directly into the adhesive.
SubfloorAll stable subfloors including cement, screed, insulation board (Isolecta) and timber floor (maximum output per m² should be limited to 100 W/m² on wooden subfloors)